GIP-1300 vibration level indicator

GIP-1300 Vibrating Level Switch - Figure 2

GIP-1300 Vibrating Level Switch - Figure 3

Product Description

GIP-1300 vibrating level switches are designed to control and monitor the maximum levels of liquid and bulk media in tanks, containers, and process units.

Advantages

High accuracy at any temperature and density of the working environment.
Chemically resistant design for monitoring the level of acids, alkalis and other chemically active liquids.

Compliance with standards

GOST 31610.0-2019 (IEC 60079-0:2017)

Certificates

EAEU RU C-RU.PB98.V.00589-25

EAEU N RU D-RU.RA05.V.46772-25

EAEU N RU D-RU.RA05.V.46755-25

ROSS RU. B01.N00124-25

TU 26.51.52-096-72453807-2024

TR TS 032/2013 No. 518/TRTS/R

Markings

Explosion protection marking

1Ex db IIC T6…T2 Gb X

Ex tb IIIC T80°C… T250°C Db X

0Ex ia IIC T6…T2 Ga X

Ex ia IIIC T80°C… T250°C Da X

Degree of protection

IP66

Installation

Explosive zones of classes 0 and/or 1 and/or 2 of indoor and outdoor installations in which mixtures assigned to categories IIA, IIB, IIC may be formed according to GOST IEC 60079-10-1-2013, explosive zones of classes 21 and 22 of indoor and outdoor installations in which mixtures assigned to categories IIIA, IIIB, IIIC may be formed according to GOST 31610.10-2-2017/IEC 60079-10-2:2015, according to Ex-marking

Technical data

Ambient temperature, °C

-61... +85

Density of the measured medium, kg/m3

450 - 1800

Nominal voltage

24 VDC
220 VAC

Sensor length, mm.

≤ 6000 (up to 8000 special order)

Joining the process

Thread:
G 3/4"; G 1"; M27x2; M33x2; NPT 3/4"; NPT 1"
Flanges:
GOST 33259-2015;
EN10921-1;
ANSI/ASME B16.5

Material of parts in contact with the environment

AISI 304, AISI 304L, AISI 316, AISI 316L, AISI 321, AISI 304 steel with PFA coating, Others on request

Operating pressure range, MPa

-0,1…10

Operating temperature range, °C

-40...+250

Output signal

DPDT
PNP/NPN
8/16 mA
NAMUR

Enclosure material

Aluminum
Stainless steel (AISI 304)

For measuring liquid media:

For standard temperatures from minus 40 to plus 150 C. L ≥ 55 mm
Process connection ≥ 3/4""

For high temperatures from minus 61 to plus 250 C. L ≥ 55 mm
Process connection ≥ 3/4"

For measuring bulk solids:

For standard temperatures from minus 40 to plus 150 C. L ≥ 220 mm
Process connection ≥ 1"

For high temperatures from minus 61 to plus 250 C. L ≥ 220 mm
Process connection ≥ 1 1/2"

For measuring liquid/bulk media

For standard temperatures from minus 40 to plus 150 C. L ≥ 110 mm
Process connection ≥ 1"

Data for the formation of mnemonics

Х1-Х2-Х3-Х4-Х5.Х6.Х7.Х8-Х9.Х10.Х11.Х12-Х13.Х14-Х15-Х16/Х17 – TU 26.51.52-096-72453807-2024

X1 – series of products:

GIP

X3 – case material:

no designation – aluminum alloy,
H – stainless steel;

X4 – presence and type of explosion protection:

O – non-explosion-proof (general industrial) design,
I – explosion protection type “intrinsically safe electrical circuit “i”,
B – explosion protection type “flame-proof enclosure “d”,
VP – explosion protection type against dust ignition by enclosures “t”,
GDP – combination of explosion protection types “d” and “t”;

X5 – type of measured environment:

L – liquid
C – bulk

X6 – temperature of the controlled environment, °C:

1 – (minus 40…plus 80)
2 – (minus 40…plus 150)
3 – (minus 61…plus 250)

Х7 – pressure of the controlled environment, MPa:

006 – 0,6
010 – 1
016 – 1,6
025 – 2,5
040 – 4
063 – 6,3
100 – 10
160 – 16
250 – 25

Х8 – density of the controlled environment, kg/m3:

ХХХХ – a number specified by the user (for example, 0840 – 840 kg/m3);

X9 – process connection type:

P – thread,
F1 – flange according to GOST,
F2 – flange according to EN,
F3 flange according to ASME;

X10 – thread type or flange diameter:

Thread type	Flange diameter according to GOST	Flange diameter according to EN	Flange diameter according to ASME B16.5
01 – thread G3/4"	015 – DN15	015 – DN15	015 – DN15
02 – G1" thread	020 – DN20	020 – DN20	020 – DN20
03 – thread G1½"	025 – DN25	025 – DN25	025 – DN25
04 – NPT thread 3/4"	040 – DN40	040 – DN40	040 – DN40
05 – NPT thread 1"	050 – DN50	050 – DN50	050 – DN50
06 – NPT thread 1½"	065 – DN65	065 – DN65	065 – DN65
07 – thread M27×2	080 – DN80	080 – DN80	080 – DN80
08 – thread M33×2	100 – DN100	100 – DN100	100 – DN100
08 – thread M33×2	150 – DN150	150 – DN150	150 – DN150
09 – other threads on request	200 – DN200	200 – DN200	200 – DN200
09 – other threads on request	250 – DN250	250 – DN250	250 – DN250

X11 – flange type (not used when selecting threads in X9):

Flange type according to F1 (GOST):
G01 – Flat welded (Type 01)
Flange type according to F2 (EN):
E01 – Flat welded flange (Type 01)
Flange type according to F3 (ASME):
A01 – Flat welded. SO (Slip On)

X12 – flange sealing surface design (not used when selecting threads in X9):

F1 performance	Execution according to F2	Execution according to F3
I01 – Plane (A)	U01 – Type A, flat surface	P01 – RF. Connecting projection
I02 – Connecting projection (B)	U02 – Type B1, connecting projection (PN 2.5 to PN 40)	P02 – LM. Large protrusion
I03 – Spike (C)	U03 – Type B2, connecting projection (PN 63 to PN 100)	P03 – SM. Small protrusion
I04 – Spike (L)	U04 – Type C, spike	P04 – LF. Large depression
I05 – Groove (D)	U05 – Type D, groove	P05 – SF. Small depression
I06 – Groove (M)	U06 – Type E, protrusion	P06 – LT. Large spike
I07 – Ledge (E)	U07 – Type F, recess	P07 – ST. Small spike
I08 – Depression (F)	U08 – Type G, O-ring recess	P08 – LG. Large groove
I09 – For oval section gasket (J)	U09 – Type H, recess for sealing ring	P09 – SG. Small groove
I10 – Under the lens gasket (K)	U09 – Type H, recess for sealing ring	P10 – RTG. Oval gasket recess

X13 – material of the immersion part:

01 – Stainless steel AISI 304
02 – Stainless steel AISI 316L
03 – Stainless steel AISI 321
04 – Stainless steel AISI 304 with polymer coating
Other materials on request

X14 – length of the immersion part*, mm:

0065 - 65
0080 - 80
0100 – 100
0220 – 220
ХХХХ – specify length
Note:
For bulk media, the minimum length of the immersion part:
1. 220 mm with a fork length of 150 mm;
2. 110 mm with a fork length of 100 mm.

X15 – output signal type:

01 - DPDT
02 - 8/16 mA
03 - NAMUR
04 - NPN
05 - PNP

X16 – quantity and type of connecting fittings (Cable entry):

Instead of XX , indicate the quantity (Max 2 pcs.) and type of cable glands/plugs/adapters

X17 – options, accessories, versions.

O - cover with glass
SHIELD - metal nameplate (additional)
RALXXX - painting in color according to customer’s requirements, XXX – code on the RAL scale
SIL - Safety Integrity Level Certificate
BIG - spark protection barrier

Submit request

Application details

Quantity

Additional description

0 / 300

Attach files

Drag files here

CAD " GORELTEX ", questionnaires, necessary documents

Remaining: 20.00 MB

Contact Sales Department

Model Breakdown

1X - 2X - 3X - 4X - 5X . 6X . 7X . 8X - 9X . 10X 11X . 12X - 13X . 14X - 15X - 16X / 17X – TU 26.51.52-096-72453807-2024

1X - Series of products

2X - Case size code

3X - Case material

4X - Presence and type of explosion protection

5X - Type of measured medium

6X - Temperature of the controlled environment, °C

7X - Pressure of controlled environment, MPa

8X - Density of the controlled environment, kg/m³

9X - Process connection type

10X - Thread type or flange diameter

11X - Flange type (not used when selecting threads in X9)

12X - Design of the flange sealing surface (not used when selecting threads in X9)

13X - Material of the immersion part

Product Description

Advantages

Compliance with standards

Certificates

Markings

Technical data

Design parameters

Additional information

Submit request

Where to buy GORELTEX products

Saint Petersburg

Moscow

Kazan

Tyumen

Khabarovsk

Minsk