• Distribution and Terminal Boxes
  • Control and Automation Cabinets
  • Lighting Equipment
  • Control and Indicating Stations
  • Visual, Audible and Signaling Devices
  • Electrical Heating and Fans
  • Video Surveillance
  • IT equipment
  • Spark protection barriers and functional safety relays
  • Cable Glands, Conduits
  • Sockets, Plugs, Extension cords
  • Switches, Selectors Switches, Sensors
  • Control and Measuring Instruments
  • Cable/Pipe Transits
  • Electrical Components and Materials
Logo

Explosion-proof, specialized battery-powered flashlight FOGOR03

Product Description

The explosion-proof, ultra-light FOGOR03 flashlight is designed specifically for miners' and construction workers' helmets. The flashlight attaches to the protective helmet with a clip or the included strap. It features a primary 3-watt LED and a backup 1-watt LED, as well as a photosensor that automatically switches power modes when ambient light is detected. The flashlight supports individual and group charging stations (for 5, 50, or 100 flashlights) and is compatible with helmets from most manufacturers.

Advantages

  • Autonomous safety: when the battery is low, the flashlight automatically locks off, providing continuous illumination for the last hour of operation. Energy efficiency: an intelligent system with a photosensor automatically switches to energy-efficient mode when there is sufficient ambient light. Universal mount: a headband mount is included, allowing the flashlight to be used on any helmet or directly on the head. Safe light spectrum: the LED spectrum does not emit ultraviolet or infrared radiation. Extreme durability: operates in a temperature range from -40°C to +50°C, and is resistant to moisture, dirt, and mechanical impact. Instant readiness: starts working in less than 1 second. Ergonomic design: full control of the flashlight is possible even while wearing gloves.

Frequently bought together

Compliance with standards

GOST 31610.0-2014
GOST 31610.11-2014
GOST R IEC 60079-7-2012
TR CU 004/2011
TR CU 012/2011
TR CU 020/2011

Certificates

Markings

Explosion protection marking
1Ex ib IIC T4 Gb X
Marking of mining equipment
PВ Ex ib I Mb X
РН1/РН2
Degree of protection
IP67
Installation
Group I for firedamp and dust;
Group II for gas subgroups IIA, IIB, IIC, zone 1;
Underground workings that are not hazardous for gas (methane) and coal dust

Technical data

Ambient temperature, °C
-40…+50
-20…+50 (mine explosion-proof design)
-40...+50 (for normal mine design)
Power consumption
1 or 3 watts
Enclosure material
A thermoplastic polymer with high resistance to impact, extreme temperatures, water, aggressive substances, and short-term direct flame. The headlight lens is made of impact-resistant polycarbonate.
Power factor
0.98
Luminous flux
60 lm for the main light source with a directed beam of light
35 lm for the additional light source with a diffused beam of light
Light beam angle
Directional beam of light flux for the main and diffused beam for the additional light source
Indication
Low battery warning.
Continuous glow time of the lantern
At least 18 hours for economy mode and 12 hours for normal operation
Power elements
Ultra-light 3.7 Volt lithium-ion battery
Average battery life of at least 1000 cycles (up to 1500 cycles)
Average lifespan of the flashlight
Not less than 50,000 hours
Overall dimensions
100x60x67 mm
Mass of the lantern
No more than 185 grams
Climatic category
NF4 (as required by MU1, U5, HL3.1, HL5, NF3.1, NF4.1, NF4.2, NF5, TS4.1, O4.1, O4.2, O5, B4.1)

Design parameters

Automatic chargers

Technical data of the automatic battery charger
Types of execution: Individual charger or group charger for 5, 50 or 100 flashlights
Supply voltage: ~110/220V (50/60 Hz)
Flashlight charging time: No more than 5 hours
Protection: IP54
Additional features: Charge indication
Electronic battery charge control and monitoring system
Checks the battery charge level status every time the flashlight is placed in the charger
Automatic chargers
Marking Number of
charging locations
Voltage, V Overall
dimensions, mm
Weight, kg
ZU03/1-230AC 1 ~100/240 75x50x65 0,1
ZU03/5-230AC 5 420x85x55 1,1
ZU03/50-230AC 50 880x1082x90 22
ZU03/100-230AC 100 880x1750x240 47

Options

Options, accessories and versions
Marking
Conservation
/KONSERVATSIA
Marine version
/MORE
Non-explosion-proof design
/PROM
Mining normal design
/RN

Additional information

Submit request

Quantity
Additional description
0 / 300

Drag files here

CAD " GORELTEX ", questionnaires, necessary documents

Remaining: 20.00 MB
or
Model Breakdown
FOGOR03 / 1X – TU 27.40.39-028-72453807-2017
1X - Options, accessories and versions

Example: FOGOR03-TU 27.40.39-028-72453807-2017

The charger must be ordered separately.

Example: ZU03/5-220AC-TU 27.40.39-028-72453807-2017

Where to buy GORELTEX products

Saint Petersburg

Head office and production site

Telephone
Address
193149, Leningrad region, Vsevolozhsk district, Novosaratovka village, Rabochaya street, house 9, building 1
Read more

Moscow

Sales office

Telephone
Address
123112, Moscow, Presnenskaya Embankment, 6, building 2, business complex "Imperia Tower", floor 12, office No. 15
Read more

Kazan

Sales office

Telephone
Address
420061, Russia, Republic of Tatarstan, Kazan, st. Nikolay Ershova, 1A, Korston Business Center, floor 11, office No. 1110
Read more

Tyumen

Sales office and production site

Telephone
Address
625031, Russia, Tyumen, Shcherbakova St., 160G
Read more