All-weather, insulated, electrically heated GTG-SHKAF thermal cabinets are designed to accommodate various equipment (flow meters, pressure and temperature sensors, converters, controllers, and other measuring and analytical equipment) operating within a limited temperature range, in hazardous areas, and in harsh weather conditions. Explosion-proof, all-weather, insulated, electrically heated GTG-SHKAF explosion-proof, all-weather wall-mounted thermal cabinets meet all standards, requirements, and regulations for electrical equipment in the chemical, oil refining, and mining industries, as well as other industries exposed to explosive atmospheres that do not contain corrosive vapors or gases in concentrations that cause the destruction of metal and insulation.

The temperature inside the GTG-SHKAF heating cabinet is increased by an explosion-proof heater with an additional automatic temperature control device. The heating element and power supply are controlled via explosion-proof KSRV boxes. If necessary, heating control units can be installed outside the heated cabinet, saving space inside for the customer's equipment. This ensures complete explosion protection of the heating system. When the outside air temperature fluctuates between -60°C and +45°C, the temperature inside the cabinet, with the thermostat engaged, remains between +5°C and +45°C without condensation.

For ease of use, the lids of the thermal cabinets are attached to the body with hinges and closed with locks.

Upon customer request, GTG-SHKAF heating cabinets can be equipped with viewing windows. Window sizes depend on the type of cabinet used and the installation location.
All-weather wall-mounted thermal cabinets GTG-SHKAF Depending on the customer's needs, the temperature inside the thermal cabinet can be regulated using various types of thermostats or an automated system based on a programmable logic controller.

To ensure high-quality thermal insulation, the interior walls of the thermal cabinet are covered with a specialized layer of ultra-light, heat-resistant, metallized, reinforced insulation or, to enhance thermal insulation, an additional coating of extruded foamed polymer.

Explosion protection is ensured by installing explosion-proof components in the thermal cabinet housing.

Scope of application: hazardous areas of premises and outdoor installations, and mines that are not hazardous due to gas or dust, according to explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and areas hazardous due to ignition of combustible dust, according to GOST IEC 61241-3-2011, hazardous production facilities of I, II, III, IV hazard classes, supervised by Rostekhnadzor of the Russian Federation and national technical supervision agencies of the CU and CIS countries.

• All-weather operation: effective thermal insulation and heating ensure stable operation at temperatures from -60°C to +45°C;
• Rational use of space: external placement of control units increases the usable area inside the cabinet;
• Flexible configuration: can be equipped with viewing windows and various temperature control systems;
• Condensation protection: maintaining a stable temperature prevents moisture from forming on the equipment;
• Versatility of application: suitable for chemical, oil refining and mining industries.