EAEU RU C-RU.NA67.B.00788/26 
EAEU N RU D-RU.RA02.V.24582/25 
ROSS RU.Z3026.04TSET0OS001.S00164 
TU 26.30.50-050-72453807-2017 
GOST R ISO 9001-2015 Saint Petersburg
Head office and production site
Telephone
Address
193149, Leningrad region, Vsevolozhsk district, Novosaratovka village, Rabochaya street, house 9, building 1
IP-535-GORELTEX 2-A Explosion-Proof Manual Fire Alarms
Product Description
Advantages
- Certified equipment ensuring safety and uninterrupted operation.
- The enclosure made of aluminum alloy with alloying modifiers combines exceptional mechanical strength and corrosion resistance.
- Providing operation as both a single element and in a group of detectors in a fire alarm system.
- Possibility of inclusion in the alarm circuit with both normally closed and normally open contacts.
- Two modes of indication: constant green glow - standby mode and
- intermittent red glow - operation mode.
- Protection against mechanical damage IK10 and a high degree of protection against moisture and dust IP66/IP67.
Frequently bought together
Compliance with standards
GOST 30852.0-2002 (IEC 60079-0:1998)
GOST 30852.1-2002 (IEC 60079-1:1998)
GOST 30852.10-2002 (IEC 60079-11:1999)
GOST IEC 61241-1-1-2011
Chapter 7.3 of the Electrical Installation Code
Chapter 7.4 of the Electrical Installation Code
TR CU 012/2011
RD 5.2-093-2004
GOST R 53325-2009
GOST R IEC 60079-31-2010
GOST 30852.20-2002
GOST 24754-2013
Certificates
Markings
Explosion protection marking
1Ex db IIC T6...T5 Gb 0Ex ia IIC T6...T5 Ga Ex tb IIIC T85°С...T100°С Db Ex ia IIIC T85°С...T100°С DaMarking of mining equipment
RN1/RN2
Degree of protection
IP66/IP67
IK10
IK10
Installation
Category II for gas subgroups IIA, IIB, IIC, zones 1, 2;
Category III for dust, explosive dust atmospheres containing volatile particles, non-conductive and conductive dust;
Underground workings that are not hazardous for gas (methane) and coal dust
Category III for dust, explosive dust atmospheres containing volatile particles, non-conductive and conductive dust;
Underground workings that are not hazardous for gas (methane) and coal dust
Technical data
Ambient temperature, °C
-60...+75 (T6/T85°C)
-60...+90 (T5/T100°C)
-60...+90 (T5/T100°C)
Operating voltage, V
9…24
Maximum switching current of reed switch contacts, A
0,25
Maximum current consumption (when triggered), A
0.035 (9V)
0.029 (12V)
0.021 (24V)
0.029 (12V)
0.021 (24V)
Installed power (at operation) Py, W
0,5
Connection
2.5mm terminals2
Coating
Antistatic polymer-epoxy coating, friction-proof, spark-proof, resistant to working environments and ionizing radiation. Color: red, RAL 3001
Material
Aluminum alloy with alloying modifiers
Detector class according to GOST R 53325-2012
A
Protection class against electric shock
I
Weight, kg
2
Climatic category
NF1 (as required NF2, NF3, NF4, NF5, HL1, HL2, HL3, HL5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1 , W5 )
Design parameters
Options
Additional information
CONNECTION DIAGRAM OF IP-535- GORELTEX 2-A DETECTORS TO THE FIRE CONTROL AND RECEPTION SYSTEM (FCP)
Short circuit connection diagram (parallel connection)
Open circuit connection diagram (serial connection)
Denomination selection table
| Type of control panel | Connection parameters | |
| Parallel connection (for short circuit) | Sequential connection (on opening) | |
| LB-07 | Rд must provide current consumption >15 mA,
Rок = 2 kOhm, VDок = KD522. |
Rd = 11 kOhm, Rok = 2 kOhm, VDok = KD522. |
| Beam | Rd = 2.4 kOhm, Rok = 2.4 kOhm, VDok = KD521A. | Rd = 2.2 kOhm, Rok = 2.4 kOhm, VDok = KD521A. |
| PPK-2 | Rd = 1.2 kOhm, Rok = 3.6 kOhm, VDok = KD521A. | Rd = 10.0 kOhm, Rok = 3.6 kOhm, VDok = KD521A. |
| Bolide | Rд = 1.5 kOhm (3.0 kOhm - to determine double operation),
Rок = 4.7 kOhm, VDок do not install |
Rд = 8.2 kOhm (4.7 kOhm - to determine double operation),
Rок = 4.7 kOhm, VDок do not set |
| Yakhont-16i | Rд = 1.8 kOhm (4.0 kOhm - to determine double operation),
Rок = 8.2 kOhm, VDок do not install |
Not applicable |
| VERS | Rд = 820 Ohm (1.8 kOhm - to determine double operation),
Rок = 7.5 kOhm, VDок do not install |
Rд = 10 kOhm (4.7 kOhm - to determine double operation),
Rок = 7.5 kOhm. VDок should not be installed. |
Differences between IPR class A and IPR class B
Differences between class A IPR and class B IPR in accordance with GOST R 53325-2012: class A IPR (IP-535- GORELTEX 1-A, IP-535- GORELTEX 2-A) are activated after the displacement of the indestructible drive element, accompanied by a change in the appearance of the IPR.
Class B IPR (IP-535-GORELTEX1-B) are activated after two actions have been performed:
1. providing access to the drive element by destroying or displacing the protective element designed as a class A drive element;
2. subsequent manual activation of the drive element.
Submit request
Quantity
Additional description
0 / 300
Drag files here
CAD " GORELTEX ", questionnaires, necessary documents
or
IP-535-GORELTEX2-A - 1X / 2X – TU 26.30.50-050-72453807-2017
1X - Cable entry size (max. 3 pcs.)
2X - Options, accessories and versions
Example: IP-535- GORELTEX 2-A-KNV1N-TU 26.30.50-050-72453807-2017.
Where to buy GORELTEX products
Moscow
Sales office
Telephone
Address
123112, Moscow, Presnenskaya Embankment, 6, building 2, business complex "Imperia Tower", floor 12, office No. 15
Kazan
Sales office
Telephone
Address
420061, Russia, Republic of Tatarstan, Kazan, st. Nikolay Ershova, 1A, Korston Business Center, floor 11, office No. 1110
Tyumen
Sales office and production site
Telephone
Address
625031, Russia, Tyumen, Shcherbakova St., 160G
Khabarovsk
Sales office
Telephone
Address
680000, Khabarovsk, st. Postysheva, 22A, office. 206
Minsk
Sales office
Telephone
Address
220125, Republic of Belarus, Minsk, Shafarnyanskaya St., 11, room 89
