EAEU RU C-RU.AZh58.V.04078-23 
EAEU N RU D-RU.RA05.V.77977-23 
ROSS RU.FB01.N00061_23 
Saint Petersburg
Head office and production site
Telephone
Address
193149, Leningrad region, Vsevolozhsk district, Novosaratovka village, Rabochaya street, house 9, building 1
BIG-2-1-22 Intrinsic Safety Barrier Discrete Input
Product Description
Advantages
- Input, output and fault indication signals are galvanically isolated from each other.
- The electronic circuits of the barriers are coated with varnish, which additionally protects the elements from external factors.
- High conversion accuracy ±0.1%
- These products are designed with functional safety in mind and are SIL2/SIL3 compliant.
- Mounting on a standard 35mm wide DIN rail.
- Easy installation/dismantling of the product.
- The compact body allows for tighter installation.
- Availability of LED indication.
- Configurable via DIP switch.
Compliance with standards
GOST 31610.0-2014
GOST 31610.11-2014
GOST IEC 60079-14-2013
TR CU 012/2011
GOST IEC 61000-6-4-2016
GOST 30804.6.2-2013
Certificates
Markings
Explosion protection marking
[Ex ia Ga] IIC [Ex ia Ga] IIB [Ex ia Ga] IIA [Ex ia Ma] I [Ex ia Da] IIIС| Main parameters: | |||
| Safety Integrity Level (SIL): | SIL 2 | ||
| Operating temperature, °C: | -20 … +60 | ||
| Power supply, V: | = 20..30 Reverse polarity protection | ||
| Input signal: | Dry contact/NAMUR | ||
| Output signal: | Relay output | ||
| Response parameters: | |||
| In. signal > 2.1 mA “1” | Yellow, constant glow | ||
| In. signal < 1.2 mA “0” | Yellow, off | ||
| Open Circuit Voltage, V: | 9,2 | ||
| Short-circuit current, mA: | 9 | ||
| Permissible load at 2A, V: | ~250 or =30 | ||
| DIN rail mounting, mm: | 35 | ||
| Maximum safe voltage, V: | 250 | ||
| Intrinsic safety parameters: | |||
| terminals 1, 2; 3, 4 | |||
| II C： | II B： | II A : | |
| U0 , B: | 10,5 | 10,5 | 10,5 |
| I0 , mA | 11,3 | 11,3 | 11,3 |
| P0 , mW | 29,7 | 29,7 | 29,7 |
| C0 , μF | 0,644 | 11 | 52 |
| L0, mH | 78,8 | 236 | 630 |
| Transfer parameters: | |||
| Response time, ms: | ≤ 20 | ||
| Power consumption, W: | 1 | ||
| Relay resource in thousands of cycles: | 100 | ||
| Response frequency, Hz: | < 10 | ||
| Galvanic isolation, V: | |||
| AC | ≥ 3000 | ||
| alternating current between intrinsically safe and non-intrinsically safe circuits |
≥ 1500 | ||
| Insulation resistance (between input/output/power supply), MOhm: | ≥ 100 | ||
| Output signal value in safe state, mA: | <3.6 or >21.5 | ||
Design parameters
Connection diagram
Overall dimensions
Options
Additional information
| DIP switches | position | |
| switch | a | b |
| S1 | Normal output mode 1 | Inverted output mode 1 |
| S2 | Fault indication on | Failure indication off |
| S3 | Normal output mode 2 | Inverted output mode 2 |
| S4 | Fault indication on | Failure indication off |
LED indication algorithm
If the input current is less than 0.08 mA, an open circuit condition is detected on the input line, the device enters a safe functional state, and the output relay is de-energized. If the input current is greater than 6 mA, an input line short circuit condition is detected, the device enters a safe functional state, the output relay is de-energized, and the indicator flashes red.
Submit request
Quantity
Additional description
0 / 300
Drag files here
CAD " GORELTEX ", questionnaires, necessary documents
or
Where to buy GORELTEX products
Moscow
Sales office
Telephone
Address
123112, Moscow, Presnenskaya Embankment, 6, building 2, business complex "Imperia Tower", floor 12, office No. 15
Kazan
Sales office
Telephone
Address
420061, Russia, Republic of Tatarstan, Kazan, st. Nikolay Ershova, 1A, Korston Business Center, floor 11, office No. 1110
Tyumen
Sales office and production site
Telephone
Address
625031, Russia, Tyumen, Shcherbakova St., 160G
Khabarovsk
Sales office
Telephone
Address
680000, Khabarovsk, st. Postysheva, 22A, office. 206
Minsk
Sales office
Telephone
Address
220125, Republic of Belarus, Minsk, Shafarnyanskaya St., 11, room 89
