Saint Petersburg
Head office and production site
Telephone
Address
193149, Leningrad region, Vsevolozhsk district, Novosaratovka village, Rabochaya street, house 9, building 1
RFBG-222-AR-24DC Functional Safety Relay
Product Description
Advantages
- 1oo2 architecture.
- Relay output for safe de-energization.
- Support contour detection.
- Built-in test pulse filter function.
- Correct operation of the safety relay is tested automatically during each on-off cycle.
| Main parameters | |
| Power supply type | from the contour |
| Voltage, V DC | 20…32 |
| Heat output, W | ≤ 2.2 at =24 V |
| Current consumption at =24V, mA | ≤ 90 |
| Test pulse duration, ms, no more than | 3 |
| Cable resistance, Ohm | 15 |
| Input devices | safety switch, discrete output signal |
| Signal type | 2no + 2nz |
| Contact type | forced management |
| Contact material | AgSnO2 + 0.2 μm Au |
| Load characteristics | AC-15: 5 A / 230 V, DC-13: 5 A / 24 V |
| Fuse characteristics | 10A gL/gG(no), 6A gL/gG(no) |
| Switching on, ms, no more than | 200 |
| Opening, ms, no more than | 50 |
| Switching frequency, Hz, no more than | 4 |
| Electromagnetic compatibility | IEC/EN 80947, IEC 61326-3-1, IEC/EN 61000-6-2, IEC/EN 61000-6-4 |
| Nominal insulation voltage , V AC |
250 |
| Nominal pulse voltage, V | 6000 (1.2/50 µs) |
| Dielectric strength, V | 1500 (within 1 min) |
| Gaps and leaks | According to IEC 80947-1 |
| Vibration, Hz | 10…55 (0.35 mm) |
| Overvoltage category | III |
| Degree of pollution | 2 |
| Degree of dust and moisture protection | IP20 |
| Operating temperature, °C | -20…. +60 |
| Storage temperature, °C | -40…. +80 |
| Altitude above sea level, m | ≤ 2000 |
| Number of operations, cycles | 10 x 106 |
| Security parameters | |
| Safety Integrity Level (SIL) | 3 |
| Average diagnostic coverage (DC avg), % | 99 |
| Mean time to failure (MTTFD), years | 164 |
| Hardware Fault Tolerance (HFT) | 1 |
| Safe failure rate (SFF), not less than, % | 99 |
| Average probability of dangerous failure on demand (PFDavg/PTI) | 1,53×10-5 |
| Probability of failure per hour (PFH), 1/h | 1,77×10-10 |
| Stop category | 0 |
| Connection diagram | |
 |
|
Additional information
Possible applications:
1-channel, FSC* connection.
System loop detection.
Feedback loop.
Use in high-request mode.
* Fail Safe Controller (FSC) is an electronic device that monitors the system and ensures its safe and reliable operation even in the event of a failure.
FSCs are used in industrial settings to protect equipment from failure, damage, or destruction due to unexpected conditions. The device continuously monitors system operation and takes immediate action upon detecting potential problems before they become dangerous or damaging.
Submit request
Quantity
Additional description
0 / 300
Drag files here
CAD " GORELTEX ", questionnaires, necessary documents
or
Where to buy GORELTEX products
Moscow
Sales office
Telephone
Address
123112, Moscow, Presnenskaya Embankment, 6, building 2, business complex "Imperia Tower", floor 12, office No. 15
Kazan
Sales office
Telephone
Address
420061, Russia, Republic of Tatarstan, Kazan, st. Nikolay Ershova, 1A, Korston Business Center, floor 11, office No. 1110
Tyumen
Sales office and production site
Telephone
Address
625031, Russia, Tyumen, Shcherbakova St., 160G
Khabarovsk
Sales office
Telephone
Address
680000, Khabarovsk, st. Postysheva, 22A, office. 206
Minsk
Sales office
Telephone
Address
220125, Republic of Belarus, Minsk, Shafarnyanskaya St., 11, room 89
